New Jersey's Pool Automation Specialists

Pool Light Replacement & LED Pool Lights in NJ

Replace burned-out or failing pool lights with bright, efficient LED and color-changing fixtures.

Pool light out? Tripping the GFCI? Still running an old incandescent bulb? We replace pool and spa lights with modern LED and color-changing fixtures - usually without draining the pool.

Because lighting is tied into your electrical and automation system, we make sure the new light is safe, properly bonded and controllable from your phone or automation panel.

Pool light services

  • Burned-out or flickering pool light replacement
  • Incandescent to LED conversion
  • Color lights: Pentair IntelliBrite, Hayward ColorLogic, Jandy and more
  • Spa light replacement
  • Light niche, cord and gasket replacement
  • Low-voltage transformer repair and replacement
  • GFCI tripping and light circuit troubleshooting
  • Light control through your automation system or app

Signs your pool light needs replacing

A light that will not turn on, flickers, fogs up with water inside the lens, or trips the GFCI needs attention. Water in a fixture is a safety issue - turn it off until it is inspected.

LED vs. incandescent

An old 400-500W incandescent pool light uses several times the energy of a modern LED fixture and burns out far sooner. LED upgrades pay for themselves in bulb life and electricity, and color LEDs transform the pool at night.

Color shows from your phone

Color-changing lights cycle through colors and shows. Connected to automation, you pick colors and scenes from an app instead of flipping a switch on and off in sequence.

Brands we install & service

Pool company? See how we partner with pool professionals.

Pool Light Replacement & LED Upgrades FAQ

How much does pool light replacement cost in NJ?

Cost depends on the fixture type, cord length, whether the niche needs work and whether you choose white or color LED. Call for a quick quote - most replacements are completed in a single visit.

Do you have to drain the pool to replace a light?

Usually not. Most pool lights have enough cord to be pulled up to the deck and replaced without draining.

Why does my pool light trip the GFCI?

Most often water has entered the fixture or the cord is damaged. It is a safety warning - leave the light off and have it inspected.

Can my new lights be controlled from my phone?

Yes, when they are connected to an automation system with app control. We can set that up at the same visit.

Ready to automate your pool?

New Jersey's Pool Automation Specialists - free estimates for homeowners and pool companies.

Text Us
Text Us Free Quote